Welcome to  the official website of Beijing union Bowflex Automobile Technology Co Ltd

Position

Home > News > Company news
Automotive professional digital overturned classroom platform - Summer micro classroom 1
2016/12/22 11:57:51

Automotive professional overturned classroom platform to meet the majority of automotive professional teachers and students summer teaching life, hereby opened the summer micro classroom, wonderful sharing automotive professional teaching knowledge, do not miss oh!!!



 


Fuel pressure regulator working principle:The size of oil by the spring and the gas chamber vacuum two coordinated, when the oil pressure is higher than the standard value, high pressure fuel will push the diaphragm moves up, open the valve, the excess fuel return pipe through reflux tank; when the pressure is lower than the standard value, the spring under the diaphragm valve will shut down, stop oil return. The role of pressure regulator is to keep the pressure in the oil path to keep constant, oil pressure is too low fuel injector injection is too weak or no fuel injection, oil pressure is too high to damage the oil circuit or injector damage.
The pressure regulator has an internal diaphragm, pressure control valve to open and close the role of oil pressure is lower than a certain value, the pressure valve is closed, the pressure oil from the oil pump internal pressure increase, when added to exceed the prescribed pressure, the diaphragm opens, the overpressure of the fuel through the oil return pipe flow back into the tank, play the role of decompression.


Check method of water temperature sensor


 


Water temperature sensorIs a sensor for measuring engine cooling water temperature, composed of thermistor, arranged on the engine cooling water channel. When the cooling water scheduling changes, the resistance value change. In the EFI gasoline engine, the sensor signal input control unit, can be modified according to how much fuel, cooling water temperature and water temperature sensor accuracy has a certain effect on the amount of fuel injection. When the mixture is too thick or too thin, should check the water temperature sensor.
Check, removable water temperature sensor, heating it in a beaker of water, and water resistance in wiring measurement when different, at a temperature of 20 degrees Celsius and its value should be 2-3K omega. If the measurement results do not meet the requirements, should replace the water temperature sensor.
Water temperature sensor failure computer display fault code.



Product show

RCMDHotNew
Scan QR codeClose